Zoom ADSL USB Modem Quick Start guide None User Manual
Page 7

7
10
10
10
10
When the installation is complete, click Finish to restart
your computer. As your computer restarts, do the
following:
a
a
a
a
Click OK when you are prompted to connect the USB
hardware, and then plug one end of the USB cable
into the modem’s USB port and the other end into
your computer’s USB port.
b
b
b
b
Plug one end of the supplied phone cord into the
modem’s jack labeled LINE and the other end into
the ADSL wall jack.
cccc
As the modem performs a startup sequence, you may
see a Found New Hardware box indicating the
progression of the installation. Typically no user action
is necessary. When the startup sequence is complete,
you will see a message that you have successfully
connected the USB hardware. Depending on your
operating system, you may be prompted to restart your
computer.