Zonet Technology ZSR0104C Series - Manual (Page 29)

Page 22
If click the “OK”, will appear firmware upgrade programming page, please wait for 35 seconds,
the Nat will restart.
When the firmware update is in process, please do not plug out the power adapter of
ZSR0104C SERIES. The sudden disconnection of power supply may damage the flash
hardware and cause the malfunction of ZSR0104C SERIES.
5.6 Reset
You can set the ZSR0104C SERIES back to its manufacturing setting and reset the ZSR0104C
SERIES by clicking the Reset button. If click the Reload button, the confirmation page appears on
the screen. Click the OK button on the confirmation page to make the default settings effective (see
Figure 5 – 5). If click the Reset button, the confirmation page appears on the screen. Click the OK