Yamaha RX-V550 - Manual (Page 54)

52
SET MENU
■ Audio set G)AUDIO SET
Use to customize this units overall audio settings.
Audio mute A.MUTE
Use to adjust how much the mute function reduces the
output volume.
Choices:
MUTE , –20 dB
• Select MUTE to completely halt all output of sound.
• Select –20 dB to reduce the current volume by 20 dB.
Audio delay A.DELAY
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices:
0 to 160 ms
Use to reassign digital input/outputs and select the input
mode.
■ Input/output assignment A)I/O ASSIGN
You can assign jacks according to the component to be
used if this unit’s initial settings do not correspond to your
needs. Change the following parameters to reassign the
respective jacks and effectively connect more
components.
Once the inputs have been reassigned, you can select the
corresponding component by using INPUT on the front
panel or the input selector buttons on the remote control.
For COMPONENT VIDEO jacks A ( C.V[A] ) and B
( C.V[B] )
Choices: DVD, V-AUX, DTV/CBL, VCR
For OPTICAL OUTPUT jack 1 ( OUT(1) )
Choices: MD/CD-R, CD, V-AUX, DTV/CBL, VCR,
DVD
For OPTICAL INPUT jacks 2 ( IN(2) ), 3 ( IN(3) )
and 4 ( IN(4) )
Choices: CD, V-AUX, DTV/CBL, VCR, DVD, MD/CD-
R
For COAXIAL INPUT jack 5 ( IN(5) )
Choices: CD, V-AUX, DTV/CBL, VCR, DVD, MD/CD-
R
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
■ Input mode B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 32 for details about the input mode).
Choices:
AUTO , LAST
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that source.
Even if LAST is selected, the last setting for the EX/ES button
will not be recalled.
2 INPUT MENU
Notes
Note
01EN_00_RXV550_EB.book Page 52 Thursday, February 5, 2004 1:50 PM