Zanussi ZHC 951 - Manual (Page 16)

15
Electrical Connection
Push fit the Cmd connecter on the cable
from the motor housing to the one from the
control box.
Place the Cmd connector in the junction box
24 and clamp it together using two
Ø2.9x6.5mm screws 12e.
Fix the junction box 24 to the hood body 1
using the two Ø2.9x9.5mm screws 12c.
Working Test
When the electrical connection has been made, test
the three speed fan and worktop illumination.
24
12e
Cmd
12c