Environment concerns – Zanussi ZDC 47100 W User Manual

Page 19

Advertising
background image

19

Environment concerns

Packaging materials
The materials marked with the symbol

are recyclable.

>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by

disposing of them properly in

appropriate collection containers.

Old machine
Use authorised disposal sites for your

old appliance. Help to keep your country

tidy!

The symbol

on the product or on its

packaging indicates that this product

may not be treated as household waste.

Instead it should be taken to the

appropriate collection point for the

recycling of electrical and electronic

equipment. By ensuring this product is

disposed of correctly, you will help

prevent potential negative

consequences for the environment and

human health, which could otherwise be

caused by inappropriate waste handling

of this product. For more detailed

information about recycling of this

product, please contact your local

council, your household waste disposal

service or the shop where you

purchased the product.

Ecological hints
To save energy and to help protect the

environment,we recommend that you

follow these hints:
• Try to load the maximum capacity of

the machine as small loads are

uneconomical.

• Always load well spun laundry. The

higher the spin speed, the lower the

electricity consumption and the shorter

the drying times.

• Do not over-dry laundry, this avoids

creasing and saves energy.
Select the drying programme

according to the type of laundry and

the required degree of dryness.

• To utilize the maximum load, laundry

which is to be dried ready to put away

(store dry) can be dried together with

items to be ironed. To do this, select

the programme for iron-dry, remove

the iron-dry items at the end of the

programme and then finish-dry the

rest of the load.

• Clean the filters regularly to avoid

excessive drying times and high

electricity consumption.

• Ventilate the room well. The room

temperature should not exceed +35°C

during drying.

Advertising
This manual is related to the following products: