Wireless security setup – X-Micro Tech. WLAN 11b Access Point User Manual
Page 14
USER’S MANUAL OF X-Micro WLAN 11b ACCESS POINT
Version: 2.0
knowledge about wireless LAN. These settings should not be changed unless you
know what effect the changes will have on your Access Point.
Screenshot – Wireless Advanced Settings
Item
D
escription
Authentication Type
Click to select the authentication type in
Open System
,
Shar d Key
or
Auto selection
.
e
Fragment Threshold
Set the data packet fragmentation threshold, value can be
written between 256 and 2346 bytes. Refer to 4.10 What
RTS Thre hold
s
Set the RTS Threshold, value can be written between 0
and 2347 bytes. Refer to 4.11 What is RTS (Request To
Beacon Interval
Set the Beacon Interval, value can be written between 20
and 1024 ms.
Refer to 4.12 What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Preamble Type
Click to select the
Long Preamble
or
Short Preamble
support on the wireless data packet transmission. Refer to
10