Antenna connections – Zenith C27H26B User Manual
Page 8
8
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a cable TV service (CABLE), see page 9 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)
Connect
the
75
ohm
Cable
from
the
Combination
VHF/UHF
Antenna
to
the
RF
IN
Jack.
If
your
Combination
VHF/UHF
Antenna
has
a
300
ohm
Twin-lead Wire, the use of the 300-75 ohm
Matching
Transformer
may
be
necessary.
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)
Connect
the
UHF
300
ohm
Twin-lead
Wire
to
the
Combiner
(not
supplied).
Connect
the
VHF
300
ohm
Twin-lead
Wire
to
the
300-75
ohm
Matching
Transformer.
Attach
the
Transformer
to
the
Combiner,
then
attach
the
Combiner
to
the
RF
IN
Jack.
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)
Connect
the
VHF
75
ohm
cable
and
UHF
300
ohm
Twin-lead
Wire
to
the
Combiner.
Attach
the
Combiner
to
the
RF
IN
Jack.
UHF 300 ohm
RF IN jack
Combiner
300-75 ohm
Matching Transformer
VHF 300 ohm
Antenna connections
UHF 300 ohm
VHF 75 ohm
RF IN jack
Combiner
75 ohm
Coaxial Cable
300-75 ohm
Matching Transformer
RF IN jack
RF IN jack
J33A0621B_EN.indb 8
J33A0621B_EN.indb 8
1/31/08 5:30:57 PM
1/31/08 5:30:57 PM