Zanussi ZWF14170W - Manual (Page 12)

12
Operating sequence
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in the
drum, one item at a
time, shaking them out
as much as possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash phase, pour it into the
compartment marked
.
If required, pour fabric softener into the
compartment marked
(the amount used must
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
3. Select the required programme
The selector dial is
divided into following
sections:
● Cottons,
● Synthetics,
● Delicates,
● Special
The green Start/Pause light starts to flash.
The selector dial can be turned either
clockwise or anticlockwise.
Position «Off» to Reset programme/Switching
OFF of the machine.
At the end of the programme the selector
dial must be turned to position «Off», to
switch the machine off.
IMPORTANT!
If you turn the programme selector dial to
another programme when the machine is
working, the red Start/Pause pilot light will
flash 3 times to indicate a wrong selection. The
machine will not perform the new selected
programme.
4. Select the required temperature
Turn the temperature
selector dial to select the
washing temperature.
Maximum temperatures
are 90°C for cottons,
60°-50°C for synthetic
fabrics, 40°C for delicate
fabrics, wool and fabrics to be hand-washed.
By selecting position (Cold) the machine will
wash with cold water. To be used for extremely
delicate items, such as curtains.
5. Select the spin speed or Night Cycle or
Rinse Hold option
ZWF 12170W ZWF 14170W
Press the Spin button repeatedly to change the
spin speed, if you want your laundry to be spun
at a speed different from the one proposed by
the appliance.
126293502.qxd 20/7/07 18:18 Página 12