Yamaha RX V2095RDS - Manual (Page 57)

55
English
Adjusting output level of the center, right rear, left rear, front effect speakers
and subwoofer
You can adjust the sound output level of the each speaker
even if the output level is already set in “Speaker balance
adjustment” on pages 31 to 33.
1
Set the PARAMETER/SET MENU switch on the remote
controller to the PARAMETER position.
2
3
Press one of the keys shown below once or more until
the name of the speaker(s) whose level you want to
adjust appears on the display.
Whenever pressed, the selection changes as the above chart
shows.
* Pressing the key on the remote controller changes the
selection in the reverse order.
4
Adjust the level on the selected speaker(s).
5
Repeat steps 2 and 3 to make adjustments on the other
speaker(s).
C E N T E R
R S U R .
L S U R .
F R O N T
S W F R
(Center speaker output level)
(Right rear speaker output level)
(Left rear speaker output level)
(Front effect speaker output level)
(Subwoofer output level)
Ⅵ
Method of adjustment
This adjustment can be made only by using the remote controller.
Note: The cover of the remote controller must be open.
LEVEL
LEVEL
PARAMETER
SET MENU
or
EXT. DEC.
PHONO
EFFECT
ON/OFF
V-AUX
CHURCH
1 2 3
CLUB
ENTER-
TAINMENT
JAZZ
STADIUM
THEATER 1
MOVIE
THEATER 2
MOVIE
VIDEO
CONCERT
THEATER
TV
CONCERT
ROCK
4 5 6
HALL 1 HALL 2
7 8 9
PARAMETER
SET MENU
SLEEP ON SCREEN
LEVEL
TEST
MASTER VOLUME
TV
VCR
STANDBY
SYSTEM
POWER ON
10 11
MUTE
/ DTS
SURROUND
12
2, 3
3, 4
1
BASIC OPERATION