Tnn 500af – ZALMAN TNN 500AF User Manual
Page 32
Advertising
TNN 500AF
6) Installing the Heatpipe VGA Cooler
NOTE) If the VGA card interferes with certain components of the case, stop and refer to the
following website (www.zalman.co.kr/product/TNN500AF.html), and replace the VGA
card with one that is recommended.
As you install the VGA card, move the VGA Case Block Base vertically as needed to
accommodate the VGA card.
Remove the Stock VGA Cooler on the VGA card and clean off the exposed contact surface
completely.
NOTE) Be extremely careful when taking off the Stock VGA Cooler. Zalman is not responsible
for any damages Due to user negligence during the Cooler’s removal.
Advertising