Volume is low, Distorted sound/weak sound on the a/d input, No effects applied at all – Yamaha SW1000XG-E User Manual

Page 44: Effects not applied to some parts, The tone is strange, The pitch is strange, Interruptions in the sound, Midi bulk data is not being received correctly

Advertising
background image

■ Volume is low.

• Is volume or expression set too low in the part control?

• Are the velocity sense settings in the part edit made incorrectly?

• Is the MIDI volume information not being received?

■ Distorted sound/weak sound on the A/D input

• Is the input source selected correctly? (

→

P. 35)

■ No effects applied at all.

• Has send/return been raised sufficiently?

■ Effects not applied to some parts

• Has the send level been raised sufficiently for each of the parts or drum part

instruments?

■ The tone is strange

• Are the bank select/program change settings made correctly?

■ The pitch is strange.

• Are the master tune, transpose and note shift settings correct?

■ Interruptions in the sound

• Has the maximum polyphony limit of 64 voices been exceeded? (

→

P. 23)

Keep in mind that when one channel is specified for multiple parts, all the multi-
ple parts will begin playing simultaneously with one Key On.

■ MIDI bulk data is not being received correctly

• Is the device number specification correct?

• Was the dump interval time set too short when the data was saved?

44

SW1000XG-E.qx 4/2/99 4:32 PM Page 44

Advertising