Xerox Phaser Color Printer 8400 User Manual
Page 72
Specialty Paper
Phaser® 8400 Color Printer
2-41
3.
At the printer’s front panel, press the OK button if the paper type is correct.
a.
If the paper is not correct, select
Change
, then press the OK button.
b.
Select the paper size, then press the OK button.
c.
Select
Special
, then press the OK button to save your selection.
4.
In the printer driver:
a.
Select the High-Resolution/Photo print-quality mode.
b.
Select either the paper type or Tray 1 as the paper source.
Printing High Resolution Photo Paper in Tray 2, 3, or 4
1.
Pull the tray completely out of the printer.
2.
Adjust the width and length paper guides to match the size of the paper.
■
Press the sides of the length guide, then slide the guide until the arrow on the guide
matches the appropriate paper size and clicks into place.
■
Slide the side guides until the arrows on the guides match the appropriate paper size
and the guides click into place.
8400-002
8400-004