Yamaha CC-70S - Manual (Page 34)

32
•
When recording important selections, be sure to make a
preliminary test to ensure that the desired source material
is being properly recorded with good sound quality.
•
The automatic recording level control circuit automatically
controls the level of the input signal used for recording.
•
Adjusting the VOLUME, BALANCE, TREBLE and BASS
controls have no effect on the recorded sound.
•
For KXW-S70, the deck which can be used for recording
is the DECK B only. When recording, be sure to load a
tape into the DECK B cassette compartment.
CD synchronized recording
1
Press the CD input selector button and load the disc to be
recorded.
2
Load a tape into the cassette compartment.
*
Wind past the beginning part of the tape on which
recording can not be performed.
3
When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
*
For selection of the Dolby B or C position, refer to the
“Dolby B and C Type Noise Reduction” on page 28 or
30.
4
Set the reverse mode switch as desired.
When the tape is set so that side A faces you, recording will
be done as follows automatically according to the selected
reverse mode.
5
Press the REC/PAUSE button.
*
The corresponding indicator will light up and the play
direction indicators flash.
6
Start CD playback by pressing the corresponding disc
select button, or by pressing the play/pause button if the
disc is already selected.
*
Before CD playback begins, recording automatically
begins on the side of the tape now selected.
RECORDING COMPACT DISCS
EMPTY
- +
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
TIME PROG TAPE EDIT + I0
SEARCH
SKIP
STOP PLAY/PAUSE
DISC SKIP RANDOM REPEAT
CD
TUNER
TAPE
PRESET A/B/C/D/E
DOWN UP
PLAY STOP PLAY
REC/PAUSE
SLEEP POWER DISPLAY VOLUME
DECK PHONO/AUX
TUNER DIRECT
A/B
Receiver
CD Player
Tape Deck (KXW-S70)
Tape Deck (KX-S90)
1
6
1
5
6 6
3 4 5 2
2 4 5 3 2
Side A only
Side B only
Side A
→
Side
B
Side B only
Side A
→
Side
B
Side B only
<
KXW-S70
>
<
KX-S90
>
<
KXW-S70
>
<
KX-S90
>