XM Satellite Radio SA10113 - Manual (Page 38)

38
You should:
Insert your MyFi into its home
stand and plug the AC adaptor
into the wall to charge the battery.
Your MyFi’s battery is low
(see page 12).
Contact XM Satellite Radio
Your MyFi may not be activated
(see page 14).
Reduce audio output level
(see page 20).
Increase audio output level
(see page 20).
Check to see if you have plugged
the AC adaptor into the home
stand. The audio line output only
works when the AC adaptor is
plugged in.
Check that you have not chosen to
skip that channel (see page 26). If
the problem persists, contact XM
Satellite Radio at 1.800.967.2346.
Verify that you are authorized to
receive that channel as part of your
XM subscription, and that you have
not asked XM Satellite Radio to
block that channel.
Nothing is wrong with your MyFi.
That information may be in the
process of being updated. On some
sports and news channels, there is
no title or artist information.
Make sure that the FM radio and
your MyFi are set to the same
frequency (see page 23).
Change to another FM frequency
(see page 23). If the problem
persists and you are using the
wireless FM transmitter in a
vehicle, change to a hard-wired
FM transmitter (see page 29).
Nothing is wrong with your MyFi.
These channels use a different
audio technology than the other
XM channels.
If this happens:
There is no power, or your
MyFi shuts off quickly.
You do not receive all XM
channels you have sub-
scribed to.
Audio sounds distorted
when using the built-in FM
transmitter.
Audio is too soft when
using the built-in FM
transmitter.
No audio when using the
home stand that is con-
nected to a stereo system.
You cannot tune to a
channel.
No song title or artist
name displayed.
No audio when listening
through an FM radio.
Audio has static while
listening through an
FM radio.
Audio on XM Instant
Traffic and Weather
channels sounds different
from other XM channels.