Program play, If necessary, select a desired disc, When the programming is completed – Yamaha CDC-775 User Manual
Page 14: Stop the unit, Press the prog button to begin programming, Or (on the front panel)
14
4
If necessary, select a desired disc.
5
Program a desired track by pressing the corresponding
numeric button.
6
Repeat steps 4 – 5 to program more tracks. You can
select the same track again.
7
When the programming is completed;
1
Stop the unit.
2
If you will select tracks from a disc (or discs) other than
the disc on the Disc 1 tray, make this unit display the
total recorded time of each disc to be used by pressing
the DISC SKIP/CHARACTER buttons in turn.
* Without this operation, the total time of the
programmed tracks will not be displayed during
programming.
3
Press the PROG button to begin programming.
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks.
1
2
3
4
5
6
7
8
9
0
+10
INDEX
REPEAT
RANDOM
TAPE
CLEAR
SYNCHRO
PROG
DIMMER
TIME
OPEN/
CLOSE
FILE MODE
FILE EDIT
TEXT SRCH
TEXT MODE
CAPS
ENTER
DISC MODE
DISC SCAN
OUTPUT LEVEL
SKIP/SEARCH
STOP
PAUSE
PLAY
DISC SKIP/
CHARACTER
3
2, 4
5
7
1
PEAK
STOP
DISC SKIP/
CHARACTER
PROG
PROG
DISC SKIP/
CHARACTER
2
3
4
DISC
or
(On the front panel)
5
PLAY