Connect up – Z-Com R1 Extender User Manual

Page 9

Advertising
background image

Connect Up

Before installing the Ethernet cable with a waterproof RJ-45 connector, it is recommended that

the Cat-5 RJ-45 coaxial cable be used for the bridge to power injector connections.

1. To connect to the hole labeled

PoE+Data, open the black cover in advance by using a

coin or a slotted screwdriver and then screw in the body of the gland and tighten.

2.

Slide the sealing nut to the RJ-45 cable from its middle breach and then insert the sealing

into the cable.

Slide the Sealing Nut from its Breach

3.

Insert the RJ-45 connector and make sure that the locking tab snaps home.

R1 Extender RJ-45 Port

4.

Screw the sealing on the gland and tighten.

Chapter 3 System Installation Page 9

Advertising