ZyXEL Communications P-870MH-C1 - Manual (Page 56)

Chapter 8 vdsl Commands
P-870MH-C1 User’s Guide
56
Figure 37 Example: vdsl status
ras> vdsl status
============================================================
VDSL DSP Firmware Version: 1.52
VDSL Line State: HANDSHAKE Total Transmit Power: 0.0 dB
DS Payload Rate: 0kbps Local Attenuation: 0.0 dB
US Payload Rate: 0kbps Local SNR Margin: 0.0 dB
VDSL retrain: 0 times Local avg SNR: 0.0 dB
DSP recovery: 0 times
------------------------------------------------------------
COE Parameters:
Romote Transmit Power: 0.0 dB
Romote Init SNR: 0.0 dB
Romote SNR Margin: 0.0 dB
Remote Attenuation: 0.0 dB
------------------------------------------------------------
Counters since last reset
RX Packet Count: 0 TX Packet Count: 0
Local FEC Error: 0 Remote FEC Error: 0
Local CRC Error: 0 Remote CRC Error: 0
Local SEF Error: 0 Remote SEF Error: 0
Local LOS Error: 0 Remote LOS Error: 0
------------------------------------------------------------
Failure Condition
Overall: 0
Error Code: 0 Watch Dog Timer: 83
Local LOS: 0 Remote LOS: 0
Local SEF: 0 Remote SEF: 0
Local NCDI: 0 Remote NCDI: 0
Local LCDI: 0 Remote LCDI: 0
============================================================