Operation – Zenoah CHTZ2500 User Manual

Page 17

Advertising
background image

7. Operation

1. When restarting the engine immediately after

stopping it, leave the choke open.

2. Overchoking can make the engine hard to start

due to excess fuel. When the engine failed to
start after several attempts, open the choke and
repeat pulling the rope, or remove the spark plug
and dry it.

STOPPING ENGINE (OP3)

1. Release the throttle lever and run the engine for

a half minute.

2. Shift the ignition switch to the “STOP” position.

• Except for an emergency, avoid stopping the

engine while pulling the throttle lever.

RUNNING IN THE ENGINE
• During the first 20 working hours, do not use the

hedge-trimmer at maximum power for long
periods.

ADJUSTING IDLING SPEED

• Before adjusting the carburetor, clean the air

filter and warm up the engine. (OP5)

(1) air filter

• Idle screw is adjusted in order to ensure a good

safety margin between idle running and clutch
engagement. (OP6)

(1) Idle screw

With the engine idling (3200 rpm), the blade
should not rotate. We recommend that you
have the dealer or an authorised mechanic
carry out any carburetor adjustments.

WARNING

IMPORTANT

IMPORTANT

NOTE

(1)

OP5

(1)

OP6

17

Advertising