Zoom ZoomAir IG-4150 - Manual (Page 45)

Chapter 5 Configuring Custom Settings 45
Configuring the Security Settings
Click the middle Change button to change the default WEP
Encryption Key of your IG (the new string must contain five
characters). Type a new Key in place of the default (see the
section Changing the Default WEP Encryption Key on page
48 and the WEP Booklet). Select Enable password (disabled
by default) and type a password to restrict access to the IG
Setup Utility. If you want to reset the default values, click Set
defaults and Ok. For maximum security, we recommend
changing the default values.
Viewing the Network Topology Settings
To access your Network Topology settings, click the bottom
Change button. The following dialog box opens:
For more information, click Help. If you want to change the
settings in the dialog box, contact your network administrator.
3
Before you click Finish in the Overview Of Your Settings
screen, you can double-check all the IG settings. Use the Back
button on the bottom of the screen to return to the previous
screens.
4
Click Exit in the Ready! screen:
You have configured your IG to access the Internet in the
ISDN/DSL Device mode. Go to Checking the IP Address on
page 29 for an explanation of an important part of the
configuration process.