XtremeMac Airplay Boost - Manual (Page 4)

 
SELECTING STEREO/MONO
MODE
AirPlay Boost allows you to select between
stereo and mono mode so that you can select
the strongest, clearest signal. Mono mode may
work better in crowded radio markets.
Step 1 –
Press the and the menu screen will appear.
The second item in the menu is “AUDIO”.
Step 2 –
Use the arrow keys to move through the menu
options. Highlight the “AUDIO” menu item and
press the to select.
Step 3 –
Use the arrow keys to toggle between
“STEREO” and “MONO” modes. Push the
to select. To show that you are in mono mode,
a small “m” will appear on the right side of the
frequency.
SELECTING LED STATUS
The blue LED on the antenna tells you that
AirPlay Boost is transmitting. You can select
“ON”, “DIM” or “OFF” for the LED.
Step 1 –
Press the and the menu screen will
appear. The third item in the menu is “LED”
Step 2 –
Use the arrow keys to move through the
menu options. Highlight the “LED” menu item
and press the to select.
Step 3 –
Use the arrow keys to highlight your
preference “ON”, “DIM” or “OFF” and push
the to select.