Xerox digital copier printer 5750 - Manual (Page 70)

2
2-42 Setting up the DocuColor
This affects all users. Continue?
Yes/No [Yes]
This option is a reminder that calibration is a global setting; if you remove calibration,
every print job is affected by your action.
If you choose Yes , the current calibration is removed and you return to the main Cali-
bration screen. If you are finished, choose Exit Calibration . The DocuColor reboots.
If you choose No , the calibration is not removed, but you still return to the main Cali-
bration screen.
Exit Calibration
When you choose Exit Calibration , the DocuColor reboots.
Change Password
Change Password enables you to set or change the administrator password for the
DocuColor. The password determines whether a user can modify the Setup options,
and whether a user has system administrator control over jobs in the Spooler and
WebSpooler queues.
Using the Spooler or WebSpooler, users can move, delete, and configure their own
print jobs; the DocuColor system administrator (or anyone with administrator pass-
word access) can move, delete, and configure jobs for all users, and can re-order jobs
within a queue.
When the DocuColor is installed, there is no password. If you do not create a pass-
word, users are not required to enter a password to modify the Setup or use the admin-
istrator functions in the Spooler or WebSpooler.
If a password has been set previously, you are required to enter it right after Start Up,
when you choose
Run Setup . Use the up and down arrow keys to select the characters
and the left and right arrows to move between them (see page 2-6).
Scroll to the third screen of the main Setup menu to choose Change Password .
Enter and confirm the password as described below.
Change Password
Clear Server
Setup