Yamaha YW50T - Manual (Page 63)

7-3
7
After cleaning
1. Dry the scooter with a chamois
or an absorbing cloth.
2. Use a chrome polish to shine
chrome, aluminum and stain-
less-steel parts, including the
exhaust system. (Even the ther-
mally induced discoloring of
stainless-steel exhaust systems
can be removed through pol-
ishing.)
3. To prevent corrosion, it is rec-
ommended to apply a corro-
sion protection spray on all
metal, including chrome- and
nickel-plated, surfaces.
4. Use spray oil as a universal
cleaner to remove any remain-
ing dirt.
5. Touch up minor paint damage
caused by stones, etc.
6. Wax all painted surfaces.
7. Let the scooter dry completely
before storing or covering it.
EWA00002
w
8 Make sure that there is no oil
or wax on the brakes or tires. If
necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires
with warm water and a mild
detergent.
8 Before operating the scooter
test its braking performance
and cornering behavior.
ECA00013
c C
8 Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.
8 Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.
8 Avoid using abrasive polishing
compounds as they will wear
away the paint.
NOTE:
Consult a Yamaha dealer for advice
on what products to use.
SCOOTER CARE AND STORAGE
5PJ-F8199-13.pm65 5/25/2004, 5:31 PM 62