Zebra Technologies A300 - Manual (Page 31)

Zebra )300 User’s Guide
Specifications
Table 5: Specifications
Print density 203 dots/inch 8 dots/mm
Print width 1 ² to 4.125² 25.6 to 105.0 mm
Print speed 2 ²/sec 51 mm/sec
Label width (including backing
material, if any) 1 ² to 4.25² 25 to 108 mm
Label length 0.5 ² to 18² 12.7 to 457 mm
Interlabel gap 0.08
² to 0.16²
2 to 4 mm
Label thickness (including backing
material, if any) 0.003 ² to 0.010² 0.076 to 0.254 mm
Label roll size Maximum outer
diameter 5.0 ² 127 mm
Minimum inner
core diameter 1.0
²
25.4 mm
Registration toler-
ance Horizontal ± 0.059 ² ± 1.5 mm
Vertical ± 0.0393 ² ± 1.0 mm
First dot location (from outer media
edge) 0.125
² to 0.140²
3.17 to 3.56 mm
Fonts available • CG Triumvirate Bold Condensed (6, 8, 10, 12, 14,
18 pt.)
• Zebra fonts A, B, C, D, E, H, GS, IBM Code Page 850
International Characters, Graphics symbols
Bar codes available • 2-digit and 5-digit supplemental code
• Codabar (Supports ratios of 2:1 to 3:1)
• Code 11
• Code 128 (Supports serialization in all subsets and
UCC Case Codes)
• Code 39 (Supports ratios of 2:1 to 3:1)
• Code 93
• EAN Versions 8 and 13, EAN Extensions
• Industrial 2 of 5, Standard 2 of 5
• Interleaved 2 of 5 (Supports ratios of 2:1 to 3:1, Modu-
lus 10 Check Digit)
• LOGMARS
• MaxiCode
• MSI
• PDF 417
• Plessey
• POSTNET
• UPC Versions A and E, UPC Extensions
55530lr4 Page 22 Wednesday, March 26, 1997 11:18 AM