FujiFilm FinePix Real 3D V3 - Manual (Page 30)

24
Troubleshooting
■ HDMI
Problem Problem Possible cause Possible cause Solution Solution P P
Problem with
picture or
sound.
The output device is not confi gured
correctly.
Pictures may not be displayed due
to improper settings or the inher-
ent limitations of the output de-
vice. You may need to adjust HDMI
output settings for the device after
turning it off and then on again; see
the documentation provided with
the device for details.
—
The HDMI cable is not correctly
connected.
Check the connection. 22
The cable does not conform to the
HDMI standard. Use a cable that conforms to the
HDMI standard.
—
The HDMI cable does not support
high speed. Use a high-speed cable when view-
ing
C images.
—
Cannot
connect cable.
The connector is not in the correct
orientation. Insert the connectors in correct ori-
entation.
22
The connector is not type A.
Use a cable with a type A connec-
tor.
—
Images are
displayed side-
by-side. Side-by-side pictures will not be
displayed in
C if Auto is selected
for HDMI Setting.
Select Side by Side. 19
C display not
available.
The current HDMI Setting does not
match output device. Choose the appropriate option for
HDMI Setting.
19
The current picture is a D image. D images are displayed in D . —
The output device is not set up cor-
rectly. See the documentation provided
with the device.
—
■ Miscellaneous
Problem Problem Possible cause Possible cause Solution Solution P P
Remote control
has no eff ect.
The battery is exhausted. Insert a fresh battery. 6
Clock has been
reset. Power has been interrupted for an
extended period. Connect the AC power adapter and
reset the clock.
8, 9