Xerox B2500 MFP - Manual (Page 15)

B2500
1 - Installation
B2500 MFP User’s Guide
15
Paper delivery stop
Adjust the paper delivery stop, depending on the format of the document to be printed. Do not forget
to raise the flap to prevent the sheets from falling down.
Paper insertion in the manual input tray
The manual input tray allows you to use various paper formats with heavier weights than the one used
in the paper feed cassette.
Only one sheet or envelope can be fed at a time.
1 Spread the manual feed guides to the maximum.
2 Insert a sheet or an envelope in the manual input tray.
3 Adjust the paper guides against the right and left edges of the sheet or the envelope.
4 Print making sure that the chosen paper format corresponds to the selected format on the printer.
Note: When using envelopes
• Feeding can be done only through the manual feed.
• Recommended area should be the area which excludes 15 mm from the leading edge, 10 mm from
the left and right edges and the rear edge.
• Envelopes which are not recommended may lead to improper printing.
• Curled envelope after printing should be fixed manually.
• Small crumples on the edge of the wide side of envelopes. Smearing, or less clear printing may
appear on the reverse side.
You can use paper, which weights
between 11 and 35 lbs (52 and 160
g/m²).