X10 Wireless Technology MK19A - Manual (Page 23)

45 44
E
XPANDING
YOUR
S
YSTEM
The products illustrated below represent
just a few of the wide range of X-10
compatible products you can choose
from to expand your Home Automation
system. They are available from electrical
outlets, department stores and mail order
catalogs.
X-10 Home Automation products also
integrate with X-10 security systems, so
you can use the security remotes that
come with them to control macros and
flash lights when the security system is
tripped.
Check out our WEB Site at:
http://www.x10.com
for more information on these and many
other X-10 products.
Power Adapter
OFF
Th er mo stat Set-Back Co ntr oll e r
LO M HI
1
9
5 13 A
I
E M
A
I E M • •
• • 1
9 5 13 • •
• •
CONTROLLED
The Dual Floodlight
Motion Detector PR511
turns on at dusk and/
or when it detects
movement, and sends
X-10 signals to
control other
Modules, or trigger
ActiveHome
macros.
The Thermostat
Setback Controller
TH2807 mounts below
your thermostat to
reduce the room
temperature at night or at
the times you set to save
energy. No wiring needed
to your existing thermostat.
Replace your existing wall switches with
the Wall Switch Module WS467.
Installs like a regular dimmer. On/Off
and Bright/Dim functions. Other
models available for 3-way lighting.
Replace an existing AC wall
outlet with the Receptacle Module
SR227. Has one 15A/1800W
controlled outlet and one outlet
which is always on.
3. Enter 014 to
control an IR Mini
Controller, 013
for standard X-10
control. The LED
turns off after the
last digit entered.
Note: In most cases, you will not need to
use the IR543 Mini Controller to receive
commands from the Mouse Remote - the
Transceiver Module does this for you and
has the added advantage of working
through walls. You can’t control the
IR543 Mini Controller and the
Transceiver Module at the same time.
C
ONTROLLING AN
IR M
INI
C
ONTROLLER
(IR543)
If you already own an IR Mini Controller,
you will need to change the X-10 Home
Automation code in the remote to use it.
The code for standard X-10 Home
Automation is 013. The code to control
the IR543 Mini Controller is 014. To
change the code:
1. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
2. Press and release
the X-10 button.