Znyx Networks ZX4300P - Manual (Page 5)

Overview
ZX4300P Series User's Guide Page 2
Features of the ZX4300PSwitch
The ZX4300P switch best satisfies the demand for high density, low cost, and high performance.
It enables system architects to accelerate development of their next-generation CPSB products
and achieve first-to-market deployment.
•
Designed for use in CompactPCI PICMG 2.16 fabric slots
•
Designed for standard CompactPCI chassis slots
•
Designed with 3 optional Rear Transition Board (RTB) configurations
•
Layer 2 switching
•
Non-blocking line-rate performance
•
802.3x and back-pressure flow control
•
HotSwap™ and CarrierClass™
•
Works with any host OS or CPU
•
Minimal power consumption (5V at 2.85A; full traffic rate)
ZX4300P Models
Model Fast Ethernet Channels
ZX4300P
24 ports to CompactPCI Packet Switched Backplane (CPSB).
When installed in a CPSB chassis, the ZX4500P may be used with the
ZXRTB05 RTB or without any RTB.
Rear Transition Board (RTB) models for the ZX4300P
Model Fast Ethernet Channels
ZXRTB05
Single-slot wide RTB with 5 ports egressed through RJ-45 ports.
Remaining 19 ports are CPSB. Use this RTB only with CPSB chassis.
ZXRTB24
Two-slot wide RTB with all 24 ports egressed through RJ-45 ports. For
use in standard CompactPCI chassis without H.110 bus.
ZXRTB24R
Single-slot wide RTB with all 24 ports egressed through two RJ-21 telco
connectors (use with dual RJ-21 cables and 1U RJ-45 patch panel, not
included). For use in standard CompactPCI chassis without H.110 bus.