Z Microsystems 8X - Manual (Page 4)

Doc# 27-0030UM Rev 1.0 Issued 12/04
4
ABOUT MANUAL
SAFETY PRECAUTIONS
DANGER:
To avoid shock hazard:
Do not penetrate the 8X with any
screw longer than .18”. Damage will
occur.
Do not connect or disconnect the 8X
during an electrical storm.
Th
e power cord plug must be connected
to a properly wired and grounded
power outlet.
Any equipment to which the 8X will
be attached must also be connected to
properly wired and grounded power
outlets.
•
•
•
•
This Manual is also available on the Z Microsystems website (www.zmicro.com). We
recommend you read this manual carefully and follow the instructions in the Installation
chapter for verifi cation of system functions and control settings.
INTRODUCTION