Xerox 180 NPS - Manual (Page 43)

USING SAMPLE DOCUMENTS
XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE 6-3
Example Printing one duplex unstapled copy of the sample document
“shapes” at 300 dpi resolution on USLetter, white paper, output to
stacker 1:
Note: When Print Sample Document is invoked with output to the
top Tray with stitching finish, the stitching is ignored.
<Media>
Indicates the media you want to use for printing the sample
document. Use the syntax <size:type:color:weight> to specify
media. Specify “USLetter,” “USLegal,” “A4” or “nxn” for the size.
Use a text string to indicate the media type and color. Specify
weight in grams per square meter (gsm).
<Stacker group>
Indicates you want the sample document to output to a
specified stacker. You can specify “Top,” “1,” or “2.”
PS–op> print sample document shapes 1 duplex dontstaple 300 USLetter::white 1