Zanussi EVOLUTION EVO700 - Manual (Page 17)

Fry Tops
T
he Evo700 Fry Tops have been designed to guarantee
that the required temperature is reached in a short time
and to ensure even heat distribution and very low heat
dispersion. The one-piece pressed cooking top with
rounded corners allows for better hygiene and is available
with a smooth, ribbed or mixed surface, in either mild
steel or chrome-plated steel.
� 1-piece pressed work top in stainless steel (1,5 mm)
with smooth rounded corners
�
Exterior panels in stainless steel with Scotch-Brite
finishing
� 1-piece side and rear panels for durability and
maximum stability
�
Right-angled, laser cut side edges for flush fitting of
units
�
Cooking plate (12 mm thick) for even temperature
distribution
�
Mild steel or hard-chromed cooking surface
� Large drain hole with grease collection drawer
�
Large 5 litres grease collection drawer (optional) for
installation on open base
Gas heating
�
Mild steel surface: temperature range from 200°C to
400°C
�
Hard-chromed surface with thermostatic control and
safety thermostat: temperature range from 130°C to
300°C
�
Piezo ignition
Electric heating
�
Incoloy armoured heating elements beneath the
cooking plate
�
Thermostatic control; safety thermostat, temperature
range from 120°C to 280°C
17