XM Satellite Radio XMR6910 - Manual (Page 7)

Press AUDIO to select between Volume (default), Bass,
Treble, Balance & Fader.
Press AUDIO until BAS appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Press AUDIO until TRE appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Press AUDIO until BAL appears
Rotate encoder left/right to adjust
(BAL L 12-BAL 00-BAL R 12) BAL 00 represents equal balance
Press AUDIO until FAD appears
Rotate encoder left/right to adjust
(FAD F 12-FAD 00-FAD R 12) FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
for AM, FM, XM, CD, and AUX modes. This allows you to save
the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Press AUDIO for 3 seconds to turn confirmation beep on/off.
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
7
XMR6910 OPERATION
General Operation
Audio
Bass
Treble
Balance
Fader
Source Audio Memory
Confirmation Beep
Mute