Xterasys USB Adapter - Manual (Page 23)

- 20 -
TX Rate Select the Tx rate from the pull-sown menu. The default is
auto.
Tx Burst Check to enable the burst mode.
Fast Roaming at Check to set the roaming interval.
Select Your Country
Region Code Select your country region code from the pull-down menu.
CCX2.0: support
Cisco Compatible
Extensions function: Check to enable the CCX2.0 function.
• LEAP turn on CCKM
• Enable Radio Measurement: can channel measurement
every 0~2000 milliseconds.
• Enable QOS: enable Quality of Service.
Turn radio ON/OFF for FAA requirement.
Radio Off/On Click to turn off the radio function.
Apply Click to apply the above settings.
About
About page display the wireless card and driver version information