ZyXEL Communications P-2302R-P1 Series - Manual (Page 7)

P-2302R-P1 Series Quick Start Guide
7
3.2.2 Connection Wizard (PPP over Ethernet)
Follow these steps if your ISP uses a PPP over Ethernet (PPPoE) connection.
1 Enter the information provided by your ISP. Use the
default values if your ISP did not provide the
requested information. Then, click Next.
2 Select Get automatically from your ISP if your
ISP did not give you an IP address. Then, click
Next, and go to step
4 .
Select Use fixed IP address provided by your ISP
if your ISP gave you a static IP address. Then, click
Next., and go to step
3 .
3 Enter the information provided by your ISP. Use the
default values if your ISP did not provide the
requested information. Then, click Next.
4 Select Factory default, unless your ISP has told
you to spoof your computer’s MAC address. Then,
click Apply.
5 Click Finish. 6 Launch another web browser, and go to any web site
(for example, http://www.zyxel.com ). If you cannot
access the Internet, see Troubleshooting .