ZyXEL Communications 802.11g Wireless Firewall Router P-320W - Manual (Page 40)

P-320W User’s Guide
40 Chapter 2 Introducing the Web Configurator
Wireless LAN General Use this screen to configure wireless LAN.
OTIST This screen allows you to assign wireless clients the Prestige’s wireless
security settings.
MAC Filter Use the MAC filter screen to configure the Prestige to block access to
devices or block the devices from accessing the Prestige.
Advanced This screen allows you to configure other advanced WLAN properties.
WAN Internet
Connection
This screen allows you to configure ISP parameters, WAN IP address
assignment and the WAN MAC address.
Advanced Use this screen to configure DNS servers.
Traffic Redirect Use this screen to configure your traffic redirect properties and parameters.
LAN IP Use this screen to configure LAN settings.
DHCP Server General Use this screen to enable the Prestige’s DHCP server and to have DNS
servers assigned by the DHCP server.
Static DHCP Use this screen to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses.
Client List Use this screen to view current DHCP client information and to always
assign an IP address to a MAC address (and host name).
NAT General Use this screen to enable NAT.
Port Forwarding Use this screen to configure servers behind the Prestige.
Trigger Port Use this screen to change your Prestige’s port triggering settings.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Management
Static Route Static Route
Rules
Use this screen to configure IP static routes.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the Prestige.
SNMP Use this screen to configure your Prestige’s settings for Simple Network
Management Protocol management.
Security Use this screen to change your anti-probing settings.
UPnP General Use this screen to enable UPnP on the Prestige.
Maintenance
System General This screen contains administrative.
Dynamic DNS Use this screen to set up dynamic DNS.
Time Setting Use this screen to change your Prestige’s time and date.
Logs View Log Use this screen to view the logs for the categories that you selected.
Log Settings Use this screen to change your Prestige’s log settings.
Table 4 Screens Summary
LINK TAB FUNCTION