Zodiac International G4 - Manual (Page 5)

3
STEP 2 - ASSEMBLY
FINNED DISC INSTALLATION
BOTTOM VIEW
Slide the finned disc over the foot pad. Insure the disc fits properly in the grooves provided and rotates freely on the foot pad.
The fins on the disc face upward.
REAR VIEW
WHEEL DEFLECTOR INSTALLATION (Only used on some pool cleaners.)
FOR CORNER OR END INSTALLATIONS
If your skimmer or wall vacuum fitting is located at the corner
or end of your pool, use enough hose sections to reach the
farthest point in the pool, plus one (1) section.
FOR CENTER INSTALLATIONS
If your skimmer or wall vacuum fitting is located at the center of
your pool, use enough hose sections to reach the farthest point in
the pool, plus two (2) sections.
Note: You may not need to use all or you may need more hose sections,
with either installation method, depending upon your pool size.
STEP 3 - HOSE ASSEMBLY
SKIMMER / WALL
VACUUM FITTING SKIMMER / WALL
VACUUM FITTING SKIMMER / WALL
VACUUM FITTING SKIMMER / WALL
VACUUM FITTING
FINS FACE
UPWARD
GROOVE
Some Zodiac Pool Cleaner models require a wheel deflector for proper performance. If your model includes one, slide the wheel
deflector over the extension pipe and secure between the two lowest pipe ridges. Make sure the top clips of the wheel deflector are
seated in the groove. The wheel deflector should rotate freely.
GROOVE