Xerox DocuColor 2240 - Manual

Customer Release Notes
DocuColor 2240/1632 Digital Printer/Copier
Xerox Corporation
Customer Release Notes
This document contains information about the product DocuColor 2240/1632. It supports Postscript Level 3, PCL,
and Scan to Mailbox and Token Ring.
System
•
The stapling icon for the ‘Top-Right’ option shows the staple in a diagonal position when the actual output will
have a vertical staple. This is due to design constraints of the stapler.
•
Check all features before copying or scanning to ensure the proper settings have been set. Not all default
settings are the same for copying and scanning.
•
Trays 1-4 cannot recognize all supported paper sizes. Use Manual Feed Tray for any paper size that is not
recognized correctly by machine UI.
•
The engine may not run at rated speed if the document sent requires a large amount of processing and ripping
time. Once the entire document has been RIPed rated time will be met.
•
Running out of paper during printing may cause machine to hang in a printing state. Check all paper trays and
ensure they are closed. If printing does not recover power off/on machine and resubmit the document.
Printing
•
When printing a document to a specific Tray (Tray 1), the document will print on the paper size loaded in the
Tray and not the paper size requested from the print driver. No error message will be displayed on the machine
UI. Check that the correct paper size is loaded in the tray before printing. Example: If you requested A3 to
print from Tray 1 which has Letter loaded, the document will print on Letter.
•
When printing more than one document from Windows ME, the documents may be held at the Windows Spool
Queue. If the documents are being held at the Windows Spool Queue, reboot the client to resume printing.
•
The PS driver produces better image quality when compared to PCL driver.
•
Enabling Secure or Delayed Printing will disable the Banner Page for the job.
Networking
Novell
•
The Novell Banner page is not supported. Use machine banner page.
•
Novell Status on Settings List does not always display the correct information.
AppleTalk
•
If multiple zones are broadcasting on the same Ethernet segment, the default zone will be selected. If a
different zone is required, it must be entered manually.
•
User must specify a true AppleTalk zone in text box otherwise default zone will be selected.
•
NT Server Printing – Username may be displayed as “Anonymous” when printing through NT4.0 Server.
•
When changing networking options or switching between segments, a reboot is required even if UI displays
other information.
E-mail Printing
•
When printing attachments via email, users must insert text in body/comment fields in order to receive output.
•
When printing email, all fonts are substituted to the machine default.