Xerox 4090 - Manual (Page 6)

TABLE OF CONTENTS
Using the 9-track magnetic tape drive 3-5
Control panel switches 3-6
Powering on the tape drive 3-9
Loading a 9-track tape 3-9
Placing a tape online to the LPS 3-11
Taking a tape offline from the LPS 3-12
Unloading a tape 3-12
Powering off the tape drive 3-12
Using the 18-track 180 Cartridge Tape System 3-13
Locating CTS components 3-14
Powering on the 180 CTS 3-17
Loading a tape 3-17
Loading a 1/4-inch cartridge tape 3-18
Placing a tape online to the LPS 3-18
Unloading a tape 3-19
Taking a tape offline from the LPS 3-20
Powering off the CTS 3-20
Receiving offline jobs 3-20
Communicating with the channel-attached host 3-21
Placing the LPS online 3-21
Taking the LPS offline 3-21
Communicating through the Shared Disk Interface processor 3-22
Communicating through the host interface processor 3-22
Starting HIP 3-22
Selecting a communication mode 3-22
Changing hosts 3-23
Placing HIP online 3-23
Taking HIP offline 3-24
4. Printing jobs
4-1
Printing task flow overview 4-1
Setting up feeder trays 4-2
Setting up output trays 4-2
Printing samples 4-3
Starting a print job 4-4
Starting an offline or online print job 4-4
Starting a print job through HIP 4-5
Selecting reports within a job 4-6
Printing multiple copies of large jobs 4-6
Checking job and printer status 4-7
Checking printer status 4-7
vi XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE