Service & spare parts, Customer care, Symptom – Zanussi FLA 801 W User Manual

Page 20: Possible causes

Advertising
background image

20

Mod. ..........
Prod. No. ...........

Ser. No. .........

Mod.
..........

Ser.

P0042

Symptom

The door will not open

Possible causes

The programme is still running.

The door lock has not yet released

The water level in the drum is too high or the machine is heating.

Spinning starts late or the machine
does not spin

The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the load is evenly distributed and spinning can resume
eventually at a lower speed, if the wash load is still not sufficiently
balanced distributed, after 10 minutes, the machine will not spin. In this
case, redistribute the load manually and reselect the spin programme.

The machine makes an unusual
noise

The noise produced when spinning may differ from your previous
washing machine, which is due to the modern drive system. This new
motor ensures a softer start and more even distribution of the laundry in
the drum when spinning, as well as increased stability of the machine.

No water is visible in the drum

Machines based on modern technology operate very economically
using very little water without affecting wash results.

Service & Spare Parts

In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Zanussi Service Force Centre by telephoning:-

0870 5 929929

Your telephone call will be automatically routed to the
Service Force Centre covering your post code area. The
addresses are listed on the following pages. Before
calling out an engineer, please ensure you have read the
details under the heading “Something Not Working.”

When you contact the Service Force Centre you will
need to give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number of the appliance (found
on the rating plate)

5. The purchase date

Customer care

For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products, please
contact our Customer Care Department by letter or
telephone at the address below or visit our website at
www.zanussi.co.uk

Customer Care Department

Zanussi

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel 08705 727727 *

* Calls to this number may be recorded for training
purposes

Advertising