Yamaha YZF-R6T(C) - Manual (Page 42)

PRE-OPERATION CHECKS
4-3
4
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-20, 6-30
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-30
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-28, 6-29
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-21, 6-24
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-31
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-31
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-32
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches • Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-20
Air intake duct
• Check that the screen is not clogged.
• Clean if necessary.
6-20
ITEM CHECKS PAGE
U5SL12E0.book Page 3 Monday, August 9, 2004 10:51 AM