Features – XiNCOM Twin WAN XC-DPG602 User Manual

Page 5

Advertising
background image

Features

Authoritative DNS-to-IP

The XC-DPG602 is an authoritative DNS-to-IP gateway that resolves a domain name to its respective IP

addresses. This new capability allows for inbound failover and load balancing for servers located behind

the gateway. Using dual WAN ports simultaneously increases available bandwidth for both uploads and

download requests. You can set load balance type by Packets, Bytes rx+tx and Sessions.

Multiple Connection Methods

All popular DSL and Cable Modems and connection methods are supported, including Fixed IP, Dynamic

IP, PPPoE, even multiple-session PPPoE.

2 x 10/100 WAN Ports

The XC-DPG602 incorporates dual 10/100 WAN ports, complete with auto-crossover for easy

connection to an existing network. All popular DSL and Cable Modems and connection methods are

supported, including Fixed IP, Dynamic IP, PPPoE, even multiple-session PPPoE.

4-Port 10/100 Switch

The XC-DPG602 incorporates a 4-port 10/100 N-Way Ethernet Switch, complete with auto crossover for

easy connection to an existing network.

Automatic Fail-over

If one broadband connection goes down all traffic is automatically re-routed through the second

broadband connection.

Stateful Packet Inspection (SPI) Firewall

Protects your network using advanced SPI against malicious and DDoS attacks.

Advanced NAT features

Access Filters, DMZ, DDNS, Remote Management, Dynamic or Static Routing, Special Applications,

Virtual Servers, SNMPv1.

Access Filter

Gain fine control over the Internet access and applications available to LAN users with a powerful URL

Blocking Engine. Five (5) user groups are available, and each group can have different access rights.

Block URL

Use this feature to block access to undesirable Web sites by LAN users. You can even have different

settings for different groups of PCs.

Figure 2. Load Balancing

Load Balance two concurrent broadband connections in any combination to expand a
network’s bandwidth to the Internet. The XC-DPG602 supports T1, xDSL, Cable, and Satillite
broadband connections.

Active connection from the ISP

The XC-DPG602 load balances
both inbound and outbound
traffic requests.

Figure 3. Automatic Fail-over

In the event of one connection going down, all traffic is re-routed to the second WAN
port utilizing the live broadband connection from the second ISP. This provides true
redundancy to ensure a network remains connected to the Internet.

Active connection from the ISP
Inactive connection from the ISP

All incoming and outgoing
traffic from a LAN has an
uninterrupted connection to
the Internet when one of the
two connections fail.

Figure 1. How it works

1

2

3

4

A client computer makes a request to
access www.(yourdomain).com.

The request goes to the ISP’s DNS
server and the DNS server replies
with the IP address of the DNS
responsible for that domain.

The request is then processed by the
Authoritative DNS of that domain
and provides the IP address of the
specified server.

The client can then access the web
server.

Internet

5

Advertising