Xerox NS-2260 - Manual (Page 48)

Create an 802.1Q VLAN
----------------------------------------------------
Add a VLAN Group
VLAN Name: [Vlan2 ] VLAN ID:[2 ](1~4094)
Protocol VLAN : None
Port Member
-----------------------
PORT1 UnTagged
PORT2 Tagged
PORT3 UnTagged
PORT4 No
PORT5 No
PORT6 No
PORT7 No
PORT8 No
action-> <Quit> <Edit> <Save> <Previous Page> <Next Page>
------------------------------------------------------------------
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter= Select Item
-------------------------------------------------------------------------
New 802.1Q VLAN settings:
VLAN name : Give a name to this new VLAN
VLAN ID : Give a VID to this new VLAN (Valid values: 2-4094)
Protocol VLAN :
Select protocol type.
Options - None
IP, ARP, AppleTalk / NetBIOS, Novell IPX,
Banyan Vines C4 / Novell IPX (raw Ethernet)
Banyan Vines C5 / Spanning Tree Protocol BPDU
Banyan Vines AD / Null SAP, DECnet MOP 01
DECnet MOP 02, DECnet DPR, DECnet LAT
DECnet LAVC, IBM SN, X.75 Internet, X.25 Layer 3