ZyXEL Communications 128MH - Manual (Page 101)

Prestige 128MH PSTN Router/Hub
6-1 Chapter 6 TCP/IP Configuration for LAN-to-LAN
Chapter 6
TCP/IP Configuration for LAN-to-LAN
This chapter shows you how to configure your Prestige for TCP/IP. Depending on your particular
applications, you will need to configure different menus. For instance, Internet access is the most
common application of TCP/IP. For this application, you should configure Menu 4. We will
illustrate the configuration for LAN-to-LAN applications in the following sections.
6.1 LAN-to-LAN Application
A typical LAN-to-LAN application is to use your Prestige to call from a branch office to the
headquarters, as depicted in the following Figure 6-1.
Figure 6-1. LAN-to-LAN Application with TCP/IP
For the branch office, you need to configure a Remote Node in order to dial out to the
headquarters. Additionally, you may also need to configure Static Routes if some services reside
beyond the immediate remote LAN.
Coporate LAN
Branch Office LAN
Prestige 128MH Prestige 128MH