Zanussi ZWG 7120 P User Manual

Page 7

Advertising
background image

• Remove the power supply cable and the draining and

inlet hose from the hose holders ( C ) on the rear of

the appliance.

• Unscrew the three bolts ( A ) and remove the hose

holders ( C ).

• Slide out the relevant plastic spacers ( B ).

• Plug the smaller upper hole and the two large ones

with the corresponding plastic plug caps.

Positioning and levelling

x 4

Level the appliance by raising or lowering the feet.

The appliance MUST be level and stable on a flat hard

floor. If necessary, check the setting with a spirit level.

Any necessary adjustment can be made with a spanner.

7

Advertising
This manual is related to the following products: