ZyXEL Communications P-202H Plus v2 - Manual (Page 6)

P-202H Plus v2 Quick Start Guide
6
8 Verify the settings in the screen. To
change the LAN information on the P-
202H Plus v2, click Change LAN
Configuration. Otherwise click Save
Settings to save the configuration and
skip to step
10 .
9 Enter the LAN IP address of your P-202H
Plus v2 in dotted decimal notation in the
LAN IP Address field. For example,
192.168.1.1 (factory default). Enter a
subnet mask in dotted decimal notation in
the LAN Subnet Mask field.
Note: If you change the P-202H Plus v2's
LAN IP address, you must use the
new IP address if you want to
access the web configurator again.
From the DHCP Server drop-down list
box, select On to allow your P-202H Plus
v2 to assign IP addresses, an IP default
gateway and DNS servers to computer
systems that support the DHCP client.
Select Off to disable DHCP server.
When DHCP server is used, set the following items: