ZyXEL Communications ZyXEL ZyAIR G-2000 - Manual (Page 9)

ZyAIR G-2000 802.11g Wireless 4-port Router
9
6. Remove any previously installed gateways in the IP
Settings tab and click OK to go back to the Internet
Protocol TCP/IP Properties screen.
7. Click Obtain DNS server address automatically if
you do not know your DNS server IP address(es).
If you know your DNS server IP address(es), click Use
the following DNS server addresses, and type them
in the Preferred DNS server and Alternate DNS
server fields.
If you have previously configured DNS servers, click
Advanced and then the DNS tab to order them.
8. Click OK to close the Internet Protocol (TCP/IP)
Properties window.
9. Click OK to close the Local Area Connection
Properties window.
3.2 Checking/Updating Your Computer’s IP Address
1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your
computer’s static IP address is in the correct subnet (in the range between 192.168.1.2 and
192.168.1.254 if using the default ZyAIR LAN IP address). Alternatively, to have the ZyAIR assign
your computer a new IP address (from the IP pool), make sure your ZyAIR is turned on, type
"ipconfig/renew" and then press ENTER.
3.3 Testing the Connection to the ZyAIR
The default IP address of the ZyAIR is 192.168.1.1.
1. Click Start, (All) Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ping” followed by a space and the IP address of the ZyAIR.