Xerox DocuColor 1632 - Manual (Page 26)

4–22
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
4
Place the Adjustment Chart face down on the Document Glass
with both Magenta color patches against the left side of the glass.
5
Place 5 sheets of white paper on top of the Adjustment Chart and
close the DADF. Select Start.
6
To continue Auto Gradation Adjustment with other screens, repeat
steps 2 to 5. When you are finished, select Close until the System
Settings screen is displayed.
7
Select Exit to exit the System Settings mode.
Reports Settings
This determines whether the job history report will be printed
automatically, and whether the reports/lists will be printed on one
side or two sides.
The following items can be set in Reports Settings.
Job History Report Sets up whether the information regarding already processed jobs
will be automatically printed.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Automatic Printing Off.
When the job storage area fills up with 50 jobs that have not been
printed, the past 50 jobs are automatically printed in chronological
order. Print jobs that are currently printing or queued are not
recorded on the Job History Report.
2 Sided Report This determines whether the reports/lists will be printed on one
side or two sides.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, 2 Sided Printing Off.
Setting Description
0 Automatic printing of
Job History Reports Off
1 Automatic printing of
Job History Reports On
Setting Description
0 2 Sided Report Off
1 2 Sided Report On