Xerox DocuColor 1632 User Manual
Page 34
4–30
U
S E R
G
U I D E
(M
A C H I N E
A
D M I N I S T R A T O R
)
Border Erase - Top &
Bottom
This sets up the default for the top and bottom Border Erase.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 5mm.
Border Erase - Left & Right
This sets up the default for the left and right Border Erase.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 5mm.
Center Erase
This sets up the default for Center Erase. It is distributed along the
center of the original image.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0 mm.
Original Type (Auto/Full
Color)
This sets up the default for Original Type on the Image Quality
screen, when Auto or Full Color is selected as the color mode on
the Basic Copying screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 1, Text & Photo (Halftone).
Setting
Description
0
None
1 ~ 50
Set the border erase
amount in increments
of 1mm
Setting
Description
0
None
1 ~ 50
Set the border erase
amount in increments
of 1mm
Setting
Description
0
None
1 ~ 50
Set the center erase
amount in increments
of 1mm