Controls and their functions – Yamaha HTR-5940 AV User Manual

Page 137

Advertising
background image

8

1

POWER switch
Press this switch to the ON position to turn on the
power to the subwoofer. When the power of the
subwoofer is on, the power indicator (4) on the rear
panel light up in green. Press this switch again to set it
to OFF position to turn off the power of the subwoofer.

2

OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the front speakers.
Signals from the INPUT 1 terminals are sent to these
terminals.
(Refer to “CONNECTIONS” for details.)

3

VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to decrease
the volume.

4

Power indicator
Light up in green when the power switch (1) is turned
on; turns off when the power switch is turned off.

5

HIGH CUT switch
Selects the high frequency cut off point. Normally, it is
set to LOW, however, you may set to HIGH if
necessary. (Refer to page 9)

6

INPUT 2 terminals
Used to input line level signals from the amplifier.
(Refer to “CONNECTIONS” for details.)

7

INPUT 1 (FROM AMPLIFIER) terminals
Used to connect the subwoofer with the speaker
terminals of the amplifier.
(Refer to “CONNECTIONS” for details.)

CONTROLS AND THEIR FUNCTIONS

POWER

VOLUME

OUTPUT

TO SPEAKERS

INPUT

2

/MONO

HIGH LOW

HIGH
CUT

INPUT 1

FROM AMPLIFIER

ON

OFF

/MONO

HIGH LOW

HIGH

CUT

INPUT 1

FROM AMPLIFIER

INPUT

2

OUTPUT

TO SPEAKERS

1

3 4

7

6 5

2

VOLUME

Subwoofer rear panel

Advertising