7 soil level, 8 bio button, 9 start/pause button – Zanussi ZJ 1217 User Manual

Page 7: 10 programme progress display

Advertising
background image

7

7 Soil level

By depressing this button it is possible to select a
programme more or less intensive according to the soil
level of your laundry.
The corresponding pilot light comes on.

Intensive

For heavy soiled laundry. The washing phase will be
prolonged by about 10 minutes. It can be selected for
cotton and synthetic items.
This option cannot be selected with the Economy
programmes .

Normal

For normally soiled laundry. The machine is pre-set for
this function.

Quick

For lightly soiled laundry. By selecting this option the
washing time is reduced by the following number of
minutes:
53 minutes for cotton at 95° C
63 minutes for cotton at 60° C
24 minutes for synthetics
8 minutes for delicates
This option can be selected for cotton, synthetic and
delicates but not together with the Economy
programmes.

8 BIO button

This function can be selected for cotton and
synthetics with a washing temperature of 40 or more
degrees.
The machine will maintain a temperature of 40° for
about 10 minutes to enable the enzymes contained
in the detergent to eliminate the dirt.
To be used for laundry with “stubborn” stains.

9 START/PAUSE button

This button has three functions:
Start - Pause - Draining of water / Spin.

After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.

To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
to flash.

Pause

Start

To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.

By depressing the Start/Pause button

• The water of programme

(Soak) is emptied out

• The water of the last rinse on programmes with

RINSE HOLD option is emptied out and the laundry
is spun.

10 Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.

After the machine has started, only the running phase
pilot light stays on. When the programme has finished,
the END pilot light comes on.

The END pilot light flashes in the event of operating
problems.

At the same time one of the following lights starts to
flash:

RINSES = the machine does not fill

WASH = the machine does not empty

PREWASH = the door has not been closed

To eliminate the problem, see paragraph “Something not
working”.

If the pilot light CLOGGED FILTER flashes at the end
of the programme this means that the drain filter must
be cleaned.

The DOOR light indicates if the door can be opened:

Light on: the machine is functioning, but the door can

be opened (see page 8).

Light off: the door can be opened (at the end of the

cycle) or cannot be opened because the machine is
functioning.

Light blinking: the machine is in PAUSE and the

door cannot be opened.

WASH

CLOGGED

FILTER

DOOR
PREWASH

SPIN

END

RINSES

DRAIN

Draining of water/spin

132996160_ZJ1217.qxd 21/08/2003 16:58 Pagina 7 (Nero/Process Black pellicola)

Advertising