Zenoah YM415FW - Manual (Page 3)

Set up
■ ENGINE
• Using attached 4 socket screws, secure the connection firmly with equal force. (F1)
■ INSTALLING HANDLE
1. Loosen the 4 bolts on the handle bracket. (F2)
2. Insert the right handle (throttle lever is attached) and the left handle assembly into the
bracket and retighten the bolts securely. (F2)
(1) Handle bracket (2) Right handle (3) Bolt (4) Left handle (5) Engine side
3. Remove the screw (F3-1) from the right grip (F3-2) and put the grip onto the right
handle. Align the positioning holes and put the screw through them. Fasten the clamp.
(F3-3)
■ PROTECTOR
• Wrap the protector around the outer pipe as shown in the figure (F4), and fasten the
hooks.
■ SAFETY GUARD
• Attach the safety guard to the gear case and fix it with the clamp and 2 bolts (M5 x 25)
securely. (F5)
(1) Bolt (2) Clamp (3) Main pipe (4) Safety guard
■ BLADE
1. Put the angled bar (F6-1) into the side holes of the inner holder (F6-4)and the
gearcase.
2. Remove the blade bolt (F6-2, Lefthanded) and the outer holder (F6-3) from the
gearshaft.
3. Put the blade onto the inner holder.
4. Put the outer holder onto the gearshaft making the recessed side face the blade.
5. Fasten the blade by the blade bolt with the washers (F6-5) and the bolt cover (F6-6).
• Detailed attachments and set up method will be shown in separate Thai language
manual.
F1
F2
F3
F4
F6
F5
3